KM 2000 Accessories

Search:
  Go


ADOS GmbH
Instrumentation and Control

Trierer Strasse 23 – 25
52078 Aachen
FRG

Phone: +49 (0)241 / 9769 - 0
Fax:     +49 (0)241 / 9769 - 16
info@ados.de
KM 2000 Accessories | Hydrocarbon Measurement
Sampled gas extraction  

Carborundum filter with protective cap,
gas sampling pipe with isolating valve and test gas valve.
Versions:

- V 4 A material (1.4571)
a) with insulation
b) without insulation

a)

b)
Mounting stubs  

Mounting stubs with single flange for mounting the gas extraction pipe.
Versions:

- material V4A (1.4571)
- material St 37
- with single flange DN 50 / PN 6, 0.49 feet long

 
Respirable dust filter with filter cartridge  

Double sided cutting ring screw connection for gas pipe
breaker R 1/4" or 0.31 inch cutting ring connection.
Heated extraction pipe  

Technical Data:
Length:

3.28 … 328 feet
Operation temperature: 149 °F … 248 °F
Nominal width: 4 … 8
Nominal voltage: 115 V AC
Outer diameter: 1.65 inch
End caps: with pull relief and bend
protection in PA 6 or silicone
Outer protection: polyamide 6 ring-spendle tube,
flame retardant, halogen-free
Temperatures: -104 °F … +302 °F,
temporary >302 °F
Optional accessory: temperature controller

 
Test gas bottle  

- zero-point-gas: synthetic air
- N-Butane in synthetic air (calibration gas)
- for non-aggressive gases
- for hydrogen sulphide (in stainless steel)
Content: 2.64 gal
Filling pressure: min. 100 bar

 
Pressure reducer  

Pressure reducer for connection to the test gas bottles.
Inlet pressure: max. 200 bar
Output pressure: 0,1 bar – 3 bar
Material: Brass

 
Test adapter  

- for ITR 498 sensor (PVC)
- for GTR 196 sensor (PVC)
- for ADOS 592 TOX sensor (PVC)
- for GTR 196 and ADOS 592 TOX sensor (aluminium)
Explosion vent  

Explosion vent for inserts in gas measuring pipes Type Wt,


BAM approved ("BAM" = Federal Institute for Material Testing)
Condensate collector  

Condensate collector with mounting sheet
6.89 x 10.24 x 4.92 inch (WxHxD)
Gasflow schematic  

A) Sampled gas suction
B) Mounting stubs with single flange
C) Heated gas suction pipe
1) Sampled gas input
2) Test gas input
3) Pre-filter or balance filter
4) Sampled gas pump
5) Flow regulator
6) Flow-through meter
7) Flow monitor
8) Heating element
9) Catalyser chamber
10) Comparison measurement
11) Measurement point
12) Reaction chamber
13) Measurement amplifier
14) Limit value monitor 1 – 4
15) Measured value integrator
16) Line plotter
17) Concentration indicator
18) Heating element sleeve
19) Temperature controller
20) Resistance thermometer
21) Gas output
Product data sheet